- Water collection
- Sludge storage
Industrial water and effluent treatment
Extensive coverage for your industrial water and effluent treatment applications
Sulzer has a deep knowledge in wastewater treatment, and with our wide product portfolio we can now offer energy-efficient and reliable solutions for your water collection, neutralization, flocculation, sedimentation, cooling, aeration, sludge storage, digestion, and dewatering processes.
- Waste water and sludge pumping - AHLSTAR™ A Range and NPP/T Range, PC Transfer pumps
- Cooling tower and –loop pumping - AHLSTAR™ A Range
- Fresh water pumping - AHLSTAR™ A Range, SNS Range
- Pumping from deep seal pits - AHLSTAR™ A Range, VA cantilever sump pump, VM vertically suspended pump
- Chemicals to tanks and reactors – PC Dosing pumps
- Agitation and mixing of waste water and sludge treatment applications - SALOMIX™ L-series, Scaba Top-mounted agitators
- Submersible pumping – XFP, AFLX, VUPX, RCP Ranges
- Submersible mixing – XRW Range
- Submersible aerators – DDS, OKI Ranges, TA TAK
- High speed turbocompressors - HST™ Turbocompressor
AHLSTAR A process pump rangeAHLSTAR A end-suction single-stage centrifugal process pumps are used for demanding industrial applications to ensure process reliability, high efficiency and low operating costs. The pump exceeds the requirements of ISO 5199.
AHLSTAR APP/T process pump rangeAHLSTAR APP/T end-suction single-stage centrifugal process pumps are used for demanding industrial applications to ensure process reliability, high efficiency and low operating costs. The pump exceeds the requirements of ISO 5199.
AHLSTAR NPP/T non-clogging process pump rangeAHLSTAR NPP/T non-clogging end-suction single-stage centrifugal process pumps are designed for industrial large solids containing liquid or abrasive slurry applications to avoid plugging. The pump exceeds the requirements of ISO 5199.
Disc diffuser system type ABSThe reliable disk diffuser system is one of the world’s most widely-installed fine-bubble aeration systems, available in four alternative diffuser models.
HST™ turbocompressorThe modern and silent HST™ turbocompressor features an advanced design with proven magnetic bearing technology and a high-speed motor driven through a built-in frequency converter.
JVCR high pressure canned LNG loading pumpThe JVCR pump is an ISO13709 / API610 Type VS6 vertical multistage can pump that is used in situations where Net Positive Suction Head Available (NPSHa) is limited. A wide range of hydraulics, discharge headgear, and pressure ratings may be supplied depending on individual application requirements.
OKI aerator mixerThe submersible OKI aerator mixer is a heavy-duty, non-clogging, gentle mixing unit which can operate both as an aerator and as a mixer.
PC dosing pumpIn sludge dewatering and thickening, barrier layer injection and conditioning agents are added to the delivery pipework for lubrication, to reduce friction losses and system operating pressure.
PC transfer pumpSulzer’s competitively priced transfer pump, with close coupled drive and gearbox. This product has a small footprint, useful where space to install is tight and is available in low to high flow configurations.
SALOMIX™ L top mounted vertical agitatorsSALOMIX™ L top-mounted vertical agitators are used for mixing and agitating process liquids in demanding industrial applications.
Scaba top mounted agitatorScaba top-mounted vertical agitators are used for mixing and agitating process liquids in many industries, including wastewater and industrial applications.
SNS end-suction single-stage process pump rangeThe SNS end-suction pump has been designed to exceed the highest energy efficiency regulations across all industries and also the design requirements of ISO 5199 international standard. The innovative design makes this centrifugal pump more reliable while significantly reducing total cost of ownership.
Submersible aerator type ABS XTA XTAKThe XTA and XTAK are self-aspirating submersible aerators for wastewater and water treatment in municipal and industrial plants.
Submersible mixed flow column pump type ABS AFLXSave space and reduce installation costs with the AFLX range of submersible axial-flow pumps, designed for direct installation in discharge pipes.
Submersible propeller pump type ABS VUPXThe VUPX pumps are ideal for applications where large volumes of storm or process water have to be pumped to heads up to a maximum of 10 meters.
Submersible recirculation pump type ABS RCPThe RCP is Sulzer’s standard range of recirculation pumps, specifically designed for pumping and recirculation of activated sludge in the denitrification/nitrification process.
Tackling water scarcity in urban areasThe current climate change scenario predicts that almost half of the world’s population will live in areas of high water stress by 2050 with limited access to fresh clean water.
Pump servicesReliable and efficient pump operation is critical for your business. Therefore you need a service partner that can respond fast and flexibly. Our pump services are second to none and provide solutions that help you to improve your processes and business performance.
Original pump spare partsOriginal spare parts machined to the correct tolerances and clearances give a perfect fit first time, every time. Our commitment to continuous improvement often allows us to supply parts with improved features, thus enhancing performance, extending equipment life, while reducing maintenance costs.
Service kitsWhen your equipment needs to be repaired you shouldn’t have to worry about spending valuable time searching for the right parts – or even worse, finding out that some small but vital parts are missing. With Sulzer service kits you get everything you need in one package.
Sulzer mechanical sealsSulzer mechanical seals are strong by design and have been proven very reliable in various pumping applications.