Submersible sewage pumps type ABS XFP are the best choice for ensuring efficient and reliable pumping in any wastewater pumping station. The submersible wastewater pumps, mainly installed in network pumping stations, are equipped with Premium Efficiency IE3 motors as standard and with the ContraBlock family of impellers.

The AS range features robust, reliable submersible pumps from 1 to 3 kW for pumping clear water, wastewater, and sewage from buildings and sites in both domestic and commercial areas.

Designed for pumping raw water, wastewater, and sewage from buildings and sites in both domestic and commercial areas. Free solids passage up to 50 mm.

Designed for pumping raw water, wastewater, and sewage from buildings and sites in both domestic and commercial areas. Free solids passage up to 65 mm.

The Sanimat 1000 is a flood-proof single lifting station for the removal of wastewater and sewage from areas below the sewer level in accordance with EN 12050-1.

The Sanimat 1002 is a flood-proof double lifting station for automatic sewage pumping from areas below the backwash level in accordance with EN 12050-1.

The Sanimat 2002 is a flood-proof double lifting station ideal for effective sewage removal from apartments, large buildings and for both new and renovated structures.

The Sanimat 4002 is a flood-proof double lifting station for automatic sewage pumping from areas below the backwash level in accordance with EN 12050-1.

The Synconta is a prefabricated polyethelyne sump designed as a single pumping station for the effective dewatering of buildings and areas below the sewer level.

The Synconta 801 is a single pump station, with a fixed pedestal and guiderail for simple pump installation and maintenance. It is ideal for automatic pumping of wastewater and sewage from locations where gravity discharge into the sewer is not possible.

The Synconta 901B and 902B is a single or double pumping station, ideal for automatic pumping of wastewater and sewage from locations and areas below the backwash level.

Our pumps and lifting stations come in standard versions and with optional features. Accessories to the pumps and lifting stations are also available and can be found on these pages.

Our pumps and lifting stations come in standard versions and with optional features. Accessories to the pumps and lifting stations are also available and can be found on these pages.

A wide range of control panels are available to enable a strong and flexible product offering. New panels are added continuously to match market needs and demands.

The CP 112 and CP 212 are compact control panels for one or two pumps. They directly connect to pumps up to 5.5 kW (12A), and feature three-phase and single-phase versions. Ex-versions are also available.

A wide range of measuring devices is available to enable a strong and flexible product offering. New devices are added continuously to match market needs and demands.

The MD 124 is a 4-20 mA loop-powered pressure sensor. It has a robust construction and is easily mounted on a standard 35 mm DIN rail. MD 124 is ideal for measuring liquid levels using the ”bubble tube” principle.

The MD 126 is a high-accuracy submersible hydrostatic level sensor. Encapsulated in stainless steel and resistant to sewage water, it is designed to measure levels in liquids such as storm water and wastewater in sump pumps.

MD 127 is a sewage water resistant, stainless steel encapsulated, submersible, hydrostatic level sensor of very high accuracy and over pressure capability. It is designed for level measurement in liquids like stormwater and wastewater in pump sumps. When connecting the 2-wire loop powered sensor in series with a DC power supply, the MD 127 gives a 4 to 20 mA output signal which is proportional to the level of the liquid.

The CA 524 is a 4G modem suitable for use with all type ABS controllers equipped with RS 232 modem communication. The modem kit comes complete with modem, dipole type T antenna, power cable and a DIN-rail socket. Diodes for indication of power and network status.

CA 461 is designed to spy and detect leakage in pumps and mixers. The amplifier is housed in a norm enclosure fitted for DIN-rail mounting. The unit is available in two executions, 24 VDC or 110-230 VAC supply.

CA 462 is designed to spy and detect temperature and leakage in pumps and mixers. The amplifier is housed in a norm enclosure fitted for DIN-rail mounting. The unit is available in two executions, 24 VDC or 110-230 VAC supply.

The PC 111 is a single-pump controller designed mainly for use in either gravitation or pressurized municipal wastewater pumping stations. Its many simple-to-use features improve pumping station functionality and reliability throughout its life-cycle.

The PC 211 is an easy-to-use dual-pump controller designed mainly for use in either gravitation or pressurized municipal wastewater pumping stations. Its numerous features improve pumping station functionality and reliability throughout its life-cycle.

In order to achieve optimal operation of different kinds of pumping stations, Sulzer designs pump controllers with powerful unique features. There is a wide range of controllers available to match different needs.