Main benefits
  • Hydraulics with Contrablock system or vortex impellers for clog-free operations
  • Unique triple seal design for outstanding reliability
  • Suitable for portable as well as in stationary installations
  • Easy to lift by using the handle (weight-balance position)
  • Motor and shaft seal monitoring system as an option
  • Low noise operation
  • Reduced maintenance cost
Main applications
  • Sewage and wastewater containing fecal matter
  • Removal of raw water and wastewater with viscous and fibrous matter
  • Drainage of garages and flooded cellars
  • Light agricultural usage (pumping of liquid manure and slurry)
Main design features
  • Three-phase centrifugal pump
  • Protection type IP 68
  • Double carbon/ceramic mechanical seal
  • Thermal sensors in the motor switch the pump off in the event of overheating (option on BX and BVX models)
  • Double mechanical seal in the oil chamber
  • Ball bearings lubricated by insulating nontoxic oil
  • Water leakage electrode sensors in the oil chamber (as an option on BX and BVX models)
  • Free solids passage: 45 to 65 mm
  • Rugged cast iron construction (EN-GJL-250: GG25)
  • Stainless steel fasteners and motor shaft (AISI 420)
  • Power cord inlet sealed with rubber and epoxy resin
  • Standard 7 meter PVC cable
Key characteristics
Capacities Up to 109 m³/h / 480 US gpm
Heads 30 m / 98 ft
Temperatures 40°C / max. 60°C for five minutes
Discharge sizes 3” ANSI 125 / DN 75 NBR 7675 horizontal flange
Maximum speed of rotation 3,450 rpm
Rated power 0.75 – 5.5 kW / 1.0 – 7.5 cv (only 60Hz motors available)
Contact us