- High efficiency - ejector consumes no energy during normal pumping sequence
- Reliable due to automated priming
- Easy to install and use
- Low energy consumption because pressurized air is only required during priming
- Low installation, maintenance and operating costs
- Service-free (no rotating parts), robust and simple design
Ejector for pump
Reliable solution for fully automated priming
Sulzer ejector is suitable for all standard process pumps. It offers an easy solution for enabling fast, reliable and fully automated priming for retrofitting existing or new installations. It also includes a full automation package (optional).
- Clean and slightly contaminated liquids
- Liquids containing particles with max. size 3 mm / 0.2 inch
Fully automated ejector package
For fully automated priming, the Sulzer ejector package includes:
- Sulzer ejector unit
- Valves with actuators for motive air and ejector suction pipe*
- Level-control switch
- Control box with logic
- Wires (5 m / 16.4 ft.)
Sulzer ejector can also be supplied without automation package. In this case delivery includes only the ejector unit and automation diagrams.
*pump discharge valve is not included
|SI units||US units|
|Priming capacity||up to 8 l/s||up to 127 USgpm|
|Maximum priming height||up to 7 m||up to 23 ft.|
|Air inlet feed pressure||4 to 10 bar||58 to 145 psi|
|Air consumption||860 Nl/min (6 bar)||32.3 SCFM (87 psi)|
|Temperature of pumped liquid||up to 90°C||up to 194°F|
AHLSTAR™ with Sulzer Ejector improves sump pumping in a cardboard millA cardboard mill customer suffered from regular pump breakdowns in the fiber line effluent sump. Sulzer replaced the two existing submersible pumps by one non-clogging AHLSTAR NPP42-150 pump equipped with a Sulzer Ejector. Read the whole case study.
Reliable and cost-effective sump pumping with Sulzer’s ejectorOne of our key customers in the pulp and paper industry was designing a new wastewater pit for their mill. The wastewater contains particles, impurities and a maximum of 1% fibers. The customer needed to pump the wastewater from a pit 2.3 meters deep and wanted to have an energy-efficient, reliable and easily maintained solution for sump pumping. The alternatives were to use a cantilever pump, a submersible pump, a self-priming process pump or a process pump with an ejector
Case studiesWherever fluids are pumped, mixed, controlled or applied, we are there. See how our solutions create value for customers and learn how we can make your pumping and mixing processes more efficient and profitable, safeguarding your production and ensuring lasting reliability.
SNS end-suction single-stage process pump rangeThe SNS end-suction pump has been designed to exceed the highest energy efficiency regulations across all industries and also the design requirements of ISO 5199 international standard. The innovative design makes this centrifugal pump more reliable while significantly reducing total cost of ownership.
AHLSTAR A process pump rangeAHLSTAR A end-suction single-stage centrifugal process pumps are used for demanding industrial applications to ensure process reliability, high efficiency and low operating costs. The pump exceeds the requirements of ISO 5199.
AHLSTAR APP/T process pump rangeAHLSTAR APP/T end-suction single-stage centrifugal process pumps are used for demanding industrial applications to ensure process reliability, high efficiency and low operating costs. The pump exceeds the requirements of ISO 5199.
AHLSTAR EPP/T high-temperature process pump rangeAHLSTAR EPP/T centerline supported end-suction single-stage centrifugal process pumps are designed to stand high temperature especially in demanding industrial hot liquid pumping applications. The pump exceeds the requirements of ISO 5199.
AHLSTAR NPP/T non-clogging process pump rangeAHLSTAR NPP/T non-clogging end-suction single-stage centrifugal process pumps are designed for industrial large solids containing liquid or abrasive slurry applications to avoid plugging. The pump exceeds the requirements of ISO 5199.
AHLSTAR WPP/T wear-resistant process pump rangeAHLSTAR WPP/T wear-resistant end-suction single-stage centrifugal pumps are designed for abrasive and erosive pumping applications, such as lime milk and mud, and coating pigments. The pump exceeds the requirements of ISO 5199.
CPE ANSI process pumps range (ANSI/ASME B73.1)CPE ANSI pumps are specifically designed to exceed the strictest energy regulations for all industries as well as the requirements of ASME B73.1. With revolutionary hydraulics and high efficiency, they offer the lowest life cycle costs.
Process pump type Ensival Moret EMTECHEMTECH horizontal single-stage end-suction pump range has been designed for demanding process pumping applications. It fulfills energy efficiency regulations across all industries and exceeds the requirements of ISO 5199 international standard. Efficient hydraulics reduces total cost of ownership (TCO).
ZPP double suction, axially split single-stage centrifugal pumpZPP double-suction axially split single-stage centrifugal pumps are used for demanding high-capacity industrial applications to ensure process reliability, high efficiency, and low operating costs