Products
-
Dry installed sewage pump type ABS FRThe FR dry-installed clogless pump enables economical pumping of heavily-polluted sewage and wastewater in municipal and industrial applications. It is ideal for pumping clear water, polluted water, and heavily-polluted sewage in commercial, industrial, and municipal applications.
-
Equipment controller EC 531The EC 531 is an all-in-one solution for control and monitoring of pumping stations with one or two pumps. EC 531 is equipped with smart VFD control including PID and Best Efficiency Point (BEP).
-
Graphical operator interface type ABS CA 511The CA 511 is an operator panel for advanced monitoring of pumping stations. It can only be used in combination with the PC 441 monitoring/controller unit. The CAN-bus manages communications and supplies power. The TFT 480x272 pixel display includes 28 keys to simplify operations and ensure user-friendly operation.
-
Moisture monitoring module type ABS CA 441The CA 441 performs leakage monitoring on submersible pumps. With four signal inputs, it monitors up to four individual pumps or one pump with separate alarms. The unit can be mounted either in the cabinet or up to 250 meters away from the pump (when using the same earth potential). CA 441 can only be used in combination with the PC 441 monitoring/controller unit.
-
Motor and supply power monitoring module type ABS CA 443The CA 443 is an electrical property measuring device used either for a complete station or for a single pump. It can be connected to the PC 441 via a galvanic-isolated CAN-bus interface and can only be used in combination with the PC 441 monitoring/controller unit.
-
Output expansion module type ABS CA 781With output expansion module CA 781 you can control an extended number of pumps with your existing PC 441 system.
-
Pump controller type ABS PC 441The PC 441 is a monitor and controller for one to four pumps, designed mainly for use in municipal wastewater pumping stations. The PC 441 has many advanced features to minimize operating costs and increase the availability of the pumping station throughout its life cycle.
-
RS 485 communication module type ABS CA 622Communication module type ABS CA 622 allows you to send and receive information to your peripheral products via your existing pump controller PC 441 using a RS 485 Modbus interface.
-
Submersible mixed flow column Pump type ABS AFLXSave space and reduce installation costs with the AFLX range of submersible axial-flow pumps, designed for direct installation in discharge pipes.
-
Submersible propeller pump type ABS VUPXThe VUPX pumps are ideal for applications where large volumes of storm or process water have to be pumped to heads up to a maximum of 10 meters.
-
Submersible sewage pump type ABS XFP 1.3-30 kWThe submersible sewage pump type ABS XFP models PE1 to PE3 are designed for use in standard and network pumping stations.
-
Submersible sewage pump type ABS XFP 30-750 kWThe submersible sewage pump type ABS XFP models PE4 to PE7 are designed for use in terminal and engineered pumping stations.
-
Temperature monitoring module type ABS CA 442The CA 442 is a temperature monitoring unit with four signal inputs. It can monitor one to four pumps with combined alarms (one alarm per pump) or up to four separate alarms using one unit per pump. The CA 442 can be connected to the PC 441 via a CAN-bus interface and can only be used in combination with the PC 441 monitoring/controller unit.