Wireless condition monitoring

Sulzer Sense IoT condition monitoring

Sulzer Sense condition monitoring is a unique solution that, in combination with Sulzer's online cloud service, allows you to remotely view the operating status of all the pumps and other rotating equipment at your facility. Wireless sensors attached to the pump measure temperature and vibration in three axis and allow to optimize preventive maintenance and enable troubleshooting.

Sulzer Sense on mobile screen
An introduction to our Sulzer Sense condition monitoring

Yes, I want to remotely monitor the operating status of my pumps

Sami Saarenvalta

Development Manager

Phone: +358 10 234 3326

Saku Vanhala

Portfolio Manager

Phone: +358 50 555 0296

Eliminate manual measuring
guy on dock looking at phone

Access data anytime anywhere

You can easily view the current status of your pumps with Sulzer's online service.

Automatic alarm
Access your data anywhere anytime with PumpsOnline

Added safety

Possible to get automatic warnings if temperature or vibration limits are exceeded.

Wireless network
Wireless Network System in Sense IoT

Easy installation

Monitoring sensors automatically build a wireless mesh network and route the data to the gateway. No need for cabling.

Wide range of applications

Sulzer Sense condition monitoring is suitable for all rotating equipment, such as pumps, agitators, mixers and motors, regardless of type or brand. Since nearly every production site has this kind of equipment, the applications are numerous.
Sulzer Sense is suitable for following applications: oil and gas, hydrocarbon processing, power generation, pupl, paper and board, general industry, chemical process industry and also water and wastewater
Infographic of how Sulzer Sense works
  1. Wireless condition monitoring sensors measure temperature and vibration
  2. Measurement sensors build a wireless mesh network
  3. Gateway sends the data to the cloud
  4. You can view the data using Sulzer's online service on a standard laptop, a tablet or even a smartphone
  5. Possible to get automatic warnings if temperature or vibration limits are exceeded

Quick and easy installation

Sulzer condition monitoring saves resources starting with the installation. The sensors are easily mounted to existing units and fit both Sulzer and other equipment. The Sulzer Sense gateway can be installed into the table or on the wall. If necessary, the Sulzer Sense routing sensors can be used to enable good connection to measurement sensors and gateway. After installation, a mesh network is automatically built and connected to the cloud.
Infographic of Sense installed in pump

Yes, I want to be able to optimize pump maintenance with 24/7 remote condition monitoring

Sami Saarenvalta

Development Manager

Phone: +358 10 234 3326

Saku Vanhala

Portfolio Manager

Phone: +358 50 555 0296

Read more about Sulzer Sense and online service