Commercial wastewater without toilet waste

From hotels to hospitals: solutions for wastewater

Commercial wastewater without toilet waste comes from several different sources. All wastewater from apartment complexes and other large residential buildings, hotels, industrial plants, cinemas, theaters, hospitals, pubs and other type of public buildings has to be taken care of.

Rainwater, groundwater and other lightly polluted water has to be treated in a proper way as well as flood water from cellars and clay or concrete pits or collected wastewater from containers and drainage pits. Sulzer is able to support and offer a perfect solution in all of these cases.

The commercial wastewater market

Pump

Lifting station

  • Lifting station type ABS Nirolift
    The Nirolift is a polyethelyne, standalone sump for below-ground use. It provides effluent pumping from washing machines, sinks, dishwashers, showers, and bathtubs.

  • Lifting station type ABS Sanimax
    The Sanimax is a sump for floor-level installation featuring a submersible pump from the Robusta or MF ranges including the MF 154 HW hot water pump.

  • Lifting station type ABS Sanisett
    The Sanisett 1 and 2 are sumps for one or two pumps, designed for above- or below-ground use and provide effluent pumping from washing machines, sinks, dishwashers, showers, and bathtubs.

Lifting station accessory

  • Check valves type ABS
    Check valves type ABS are non-return valves made from cast iron or plastic for horizontal or vertical discharge lines in accordance with EN 12050-4.

  • Flushing valve type ABS
    Programmable, piston- and ball-operated flushing valve, for maintaining a clean, deposit-free sump.

  • Plug-in alarm type ABS
    Plug-in acoustic alarm for connection to a 230 V Euro socket.

  • Pump and lifting station accessories
    Our pumps and lifting stations come in standard versions and with optional features. Accessories to the pumps and lifting stations are also available and can be found on these pages.

Control panel

  • Control panel type ABS CP 114
    The CP 114 is a compact control panel for single pumping stations. It is suitable for use in applications such as tanks, small pits, or standard commercial applications with a single-phase 1/230/N/PE power supply.

  • Control panel type ABS CP 116 and CP 216
    The CP 116 and CP 216 compact control panels for one or two pumps directly connect to pumps up to 5.5 KW (12A). The optional GSM/GPRS modem allows communication with AquaWeb or Supervisory Control and Data Acquisition (SCADA) systems using the Comli or Modbus protocols. Ex-versions are also available.

  • Control panel type ABS CP 221
    The CP 221 control panel provides a complete solution for two-pump sewage pumping stations. It is built around the PC 242 controller with advanced control and monitoring features to ensure optimum performance and reliability over the whole life cycle of the station.

  • Control panels
    A wide range of control panels are available to enable a strong and flexible product offering. New panels are added continuously to match market needs and demands.

  • Control panels type ABS CP 112 and CP 212
    The CP 112 and CP 212 are compact control panels for one or two pumps. They directly connect to pumps up to 5.5 kW (12A), and feature three-phase and single-phase versions. Ex-versions are also available.

Measuring device

  • Conductive level switch type ABS MD 131
    The MD 131 is a conductive level switch primarily used as an overflow switch in sewage pumping pits. The MD 131 can also be used in other applications where the conductivity of the medium is above 20 μS/cm.

  • Float switch type ABS KS
    The KS float switch, used in liquids for control or signal activation, operates in response to the liquid level. It is also suitable for use in sewage and for automatic level control. The KS float switch is impact- and shock-resistant, mercury-free, and environmentally friendly.

  • Measuring devices
    A wide range of measuring devices is available to enable a strong and flexible product offering. New devices are added continuously to match market needs and demands.

  • Pressure sensor type ABS MD 124
    The MD 124 is a 4-20 mA loop-powered pressure sensor. It has a robust construction and is easily mounted on a standard 35 mm DIN rail. MD 124 is ideal for measuring liquid levels using the ”bubble tube” principle.

  • Submersible pressure sensor type ABS MD 126
    The MD 126 is a high-accuracy submersible hydrostatic level sensor. Encapsulated in stainless steel and resistant to sewage water, it is designed to measure levels in liquids such as storm water and wastewater in sump pumps.

  • Submersible pressure sensor type ABS MD 127
    MD 127 is a sewage water resistant, stainless steel encapsulated, submersible, hydrostatic level sensor of very high accuracy and over pressure capability. It is designed for level measurement in liquids like stormwater and wastewater in pump sumps. When connecting the 2-wire loop powered sensor in series with a DC power supply, the MD 127 gives a 4 to 20 mA output signal which is proportional to the level of the liquid.

Control accessory

  • Control accessories
    A wide range of accessories is available to enable a strong and flexible product offering. New accessories are added continuously to match market needs and demands.

  • Graphical operator interface type ABS CA 511
    The CA 511 is an operator panel for advanced monitoring of pumping stations. It can only be used in combination with the PC 441 monitoring/controller unit. The CAN-bus manages communications and supplies power. The TFT 480x272 pixel display includes 28 keys to simplify operations and ensure user-friendly operation.

  • GSM 3G modem type ABS CA 523
    The CA 523 is a 3G modem suitable for use with all type ABS controllers equipped with RS 232 modem communication. The modem kit comes complete with modem, dipole type T antenna, power cable and a DIN-rail socket. Diodes for indication of power and network status.

  • Leakage relay type ABS CA 461
    CA 461 is designed to spy and detect leakage in pumps and mixers. The amplifier is housed in a norm enclosure fitted for DIN-rail mounting. The unit is available in two executions, 24 VDC or 110-230 VAC supply.

  • Moisture monitoring module type ABS CA 441
    The CA 441 performs leakage monitoring on submersible pumps. With four signal inputs, it monitors up to four individual pumps or one pump with separate alarms. The unit can be mounted either in the cabinet or up to 250 meters away from the pump (when using the same earth potential). CA 441 can only be used in combination with the PC 441 monitoring/controller unit.

  • Motor and supply power monitoring module type ABS CA 443
    The CA 443 is an electrical property measuring device used either for a complete station or for a single pump. It can be connected to the PC 441 via a galvanic-isolated CAN-bus interface and can only be used in combination with the PC 441 monitoring/controller unit.

  • Output expansion module type ABS CA 781
    With output expansion module CA 781 you can control an extended number of pumps with your existing PC 441 system.

  • RS 485 communication module type ABS CA 622
    Communication module type ABS CA 622 allows you to send and receive information to your peripheral products via your existing pump controller PC 441 using a RS 485 Modbus interface.

  • Temperature and leakage relay type ABS CA 462
    CA 462 is designed to spy and detect temperature and leakage in pumps and mixers. The amplifier is housed in a norm enclosure fitted for DIN-rail mounting. The unit is available in two executions, 24 VDC or 110-230 VAC supply.

  • Temperature monitoring module type ABS CA 442
    The CA 442 is a temperature monitoring unit with four signal inputs. It can monitor one to four pumps with combined alarms (one alarm per pump) or up to four separate alarms using one unit per pump. The CA 442 can be connected to the PC 441 via a CAN-bus interface and can only be used in combination with the PC 441 monitoring/controller unit.

Pump controller

  • Control system type ABS PCx
    PCx is a powerful, technically-advanced control system enabling scalable, flexible, and modular system buildup. It is suitable for applications such as small and medium-sized sewage treatment plants, water treatment plants, booster pressure stations, and sewage pumping stations.

  • Pump controller type ABS PC 111
    The PC 111 is a single-pump controller designed mainly for use in either gravitation or pressurized municipal wastewater pumping stations. Its many simple-to-use features improve pumping station functionality and reliability throughout its life-cycle.

  • Pump controller type ABS PC 211
    The PC 211 is an easy-to-use dual-pump controller designed mainly for use in either gravitation or pressurized municipal wastewater pumping stations. Its numerous features improve pumping station functionality and reliability throughout its life-cycle.

  • Pump controller type ABS PC 242
    The PC 242 is a two-pump controller designed mainly for use in either gravitation or pressurized municipal wastewater pumping stations. It has many advanced features to minimize costs in the pumping station throughout its entire life cycle.

  • Pump controller type ABS PC 441
    The PC 441 is a monitor and controller for one to four pumps, designed mainly for use in municipal wastewater pumping stations. The PC 441 has many advanced features to minimize operating costs and increase the availability of the pumping station throughout its life cycle.

  • Pump controllers
    In order to achieve optimal operation of different kinds of pumping stations, Sulzer designs pump controllers with powerful unique features. There is a wide range of controllers available to match different needs.

You may also be interested in