- No risk of motor contamination during operation
- No need to enter into dangerous pump sumps
- Pull-out design allows for easy removal of the motor without disconnecting the pump from the pipework
- Ample space inside impeller and volute prevents blockage
- Dry running capability possible with a double seal arrangement for reliable operation
- Used with standard IEC air-cooled motors
Dry installed sewage pump type ABS FR
Clog-free sewage solutions
The FR dry-installed pump enables economical pumping of heavily-polluted sewage and wastewater in municipal and industrial applications. It is ideal for pumping clear water, polluted water, and heavily-polluted sewage in commercial, industrial, and municipal applications.
- Clear water
- Polluted water
- Heavily-polluted sewage containing solids, fecal slurry, and sludge in commercial, industrial, and municipal applications
Main design features
- Back pull-out motor design
- Vertical or horizontal installation
- Double mechanical seals
- Pumps can be supplied with optional equipment where self-priming is required
|Discharge sizes||DN 150 to DN 800|
Max flow: 2,800 l/s
Max. head: 80 m
Max. flow: 2,800 l/s (45 970 US gpm)
Max. head: 120 m (393 ft)
Inlet pumping stationInlet pumping stations are somewhat similar to large terminal pumping stations. Depending on the depth of the incoming sewer, the lifting heads can range from around 2 up to 30 meters. To prevent hydraulic shock loads, which negatively impact the biological process, the stations often make use of variable-speed drives and/or several pumps in parallel.
Outlet pumping stationsOutlet pumping stations are required when the level of the treatment plant is lower than that of the receiving water. This is especially true when discharging into a river, which can rise during heavy rain or flood periods, or into the sea, where the level varies with the tide. Outlet pumping stations may also be needed to compensate for increasing frictional losses in the outgoing pipe at high flows, for example in long sea outfall pipes.
Return of activated sludgeOutlet pumping stations are required when the level of the treatment plant is lower than that of the receiving water. This is especially true when discharging into a river, which can rise during heavy rain or flood periods, or into the sea, where the level varies with the tide.
Storm water pumping stationDuring heavy rainfall, storm water pumping stations deliver large volumes of water at low head to receiving surface waters or sewers. Having long been a part of flood management, they are increasingly involved in climate adaptation strategies for low-lying coastal cities.
Storm water retention tankStorm water retention tanks act as a buffer during periods of heavy rainfall. This is increasingly important as areas become more developed, with hard surfaces such as roofs, roads and parking lots that cannot absorb the rainwater. When storm water retention tanks are implemented, gravity or pumps can be utilized to provide a reduced continuous flow into the sewer system. Sulzer expertise makes it possible to avoid peak hydraulic loads and to limit the stresses on existing sewer systems.
Terminal pumping stationTerminal pumping stations receive municipal wastewater from network pumping stations. Installed in dry or wet wells, the pumps forward the medium to a treatment plant for final purification. Due to the lack of screens at most pumping stations, difficult materials such as fibrous sanitary and packaging items are a constant threat to uptime.