The legacy compressors were located underground to reduce noise pollution
The legacy compressors were located underground to reduce noise pollution
The largest wastewater treatment facility in Upper Austria, the Linz-Asten sewage treatment works serves a population equivalent of 950’000. The 900 square kilometer catchment area contains the regional capital Linz, 39 neighboring municipalities and a number of Austria’s major industrial companies.

The search for a solution for new compressor had been ongoing for some time, but plans accelerated when the plant’s operations teams heard positive reports on the performance of Sulzer’s HST™ turbocompressors recently installed 130 km away at Salzburg’s main wastewater treatment facility.

The HST technology is designed for exceptionally high reliability in demanding process applications. HST turbocompressors have few moving parts and, thanks to magnetic bearings, are not subject to mechanical wear. That dramatically reduces routine maintenance requirements compared to older compressor technologies.
Since the new installation of HST turbocompressors, energy consumption is on track to fall by 6’200 kWh per day
Since the new installation, energy consumption is on track to fall by 6’200 kWh per day

Quiet, simple and efficient

After a competitive tender process, the contract to replace the blowers was awarded to Sulzer. To allow operation of the plant to continue uninterrupted during the upgrade process, the new Sulzer’s HST40 compressors were installed in a purpose-built above-ground, single story compressor house. This approach was made possible by the very low operating noise of the Sulzer compressors, which produce only 70 dB(A), compared to the 100 dB(A) generated by the old units.

The new blower house and pipework were designed to accommodate six HST40 units, with four installed during the initial phase of the project, to be operated in parallel with two of the existing blowers. That approach was chosen to enable a smooth transition to HST technology. To accommodate for the old blowers, which were slower to reach full speed, some smart adaptations to the control systems were made to ensure that they would operate in sync with the fast-starting HST turbo compressors.
Legacy compressors reached high annual maintenance costs
Over recent years, annual maintenance costs for the legacy compressors has reached EUR 40’000

An easy switch

The installation proceeded according to schedule and the four HST compressors were brought into operation with the changeover from the old blowers taking just 10 hours. Following on from this, the two final turbo compressors have also been installed and commissioned.

Since their installation, the new HST compressors have been quietly and effectively performing their role. For the Linz-Asten maintenance team, that’s exactly what they wanted. With no temperamental blowers to look after, they can focus their efforts on performance, efficiency and reliability improvements elsewhere on the site.

The greater energy efficiency of the HST units has had a significant impact on energy costs. Energy consumption at the site is on track to fall by more than 6200 kWh per day. Combined with the maintenance cost reductions, that should save the facility around EUR 175’000 per year, while reducing annual carbon emissions by more than 580 tonnes.
  • HST™ turbocompressor
    The modern and silent HST™ turbocompressor features an advanced design with proven magnetic bearing technology and a high-speed motor driven through a built-in frequency converter.
Contact us