More information

The larger size, high sewage flows and long operating hours of terminal pumping stations make reliability the highest priority. Strong links between equipment selection, maintenance and operating strategy are thus required to keep them problem-free.

Sulzer’s application knowledge extends from pumping station design to ongoing optimization. By combining large solids passage with excellent rag handling, Sulzer pumps ensure blockage-free sewage pumping with the lowest lifecycle cost. Sulzer’s easy-to-use pump controllers and monitoring equipment further safeguard and improve station operation.

Products

Products

  • BlueLinq modules
    BlueLinQ modules
    The range and number of plug-and-play input and output modules that can be connected, enables full control and monitoring of your pumping station
  • BlueLinq Pro
    BlueLinQ Pro controller
    Designed for simple installation into new or existing infrastructure, the BlueLinQ Pro controller is the next generation monitoring and control solution.
  • CMS 24x Monitoring and Reporting
    CMS 24x monitoring and reporting
    AquaWeb is an advanced web based monitoring and surveillance system. The system is mainly aimed at pumping stations within wastewater collection networks and for flood protection but can also be used to monitor other rotating equipment as for instance air compressor. The basic version includes remote on-line monitoring with support for geographical map and an interface to stations.
  • Conductive level switch type ABS MD 131
    Conductive level switch type ABS MD 131
    The MD 131 is a conductive level switch primarily used as an overflow switch in sewage pumping pits. The MD 131 can also be used in other applications where the conductivity of the medium is above 20 μS/cm.
  • Dry installed sewage pump type ABS FR
    Dry installed sewage pump type ABS FR
    The FR dry-installed clogless pump enables economical pumping of heavily-polluted sewage and wastewater in municipal and industrial applications. It is ideal for pumping clear water, polluted water, and heavily-polluted sewage in commercial, industrial, and municipal applications.
  • Equipment controller EC 531
    Equipment controller EC 531
    The EC 531 is an all-in-one solution for control and monitoring of pumping stations with one or two pumps. EC 531 is equipped with smart VFD control including PID and Best Efficiency Point (BEP).
  • Float switch type ABS KS
    Float switch type ABS KS
    The KS float switch, used in liquids for control or signal activation, operates in response to the liquid level. It is also suitable for use in sewage and for automatic level control. The KS float switch is impact- and shock-resistant, mercury-free, and environmentally friendly.
  • GSM-4G Modem Type CA 524
    GSM-4G Modem type CA 524
    The CA 524 is a 4G modem suitable for use with all type ABS controllers equipped with RS 232 modem communication. The modem kit comes complete with modem, dipole type T antenna, power cable and a DIN-rail socket. Diodes for indication of power and network status.
  • Leakage relay type ABS CA 461
    Leakage control type ABS CA 461
    CA 461 is designed to spy and detect leakage in pumps and mixers. The amplifier is housed in a norm enclosure fitted for DIN-rail mounting. The unit is available in two executions, 24 VDC or 110-230 VAC supply.
  • Muffin Monster grinders
    Muffin Monster™ inline/open channel grinders
    The Muffin Monster™ sewage grinders are designed to protect pumps and other equipment by grinding down the toughest wastewater solids.
  • Pressure Sensor Type ABS MD 124
    Pressure sensor type ABS MD 124
    The MD 124 is a 4-20 mA loop-powered pressure sensor. It has a robust construction and is easily mounted on a standard 35 mm DIN rail. MD 124 is ideal for measuring liquid levels using the ”bubble tube” principle.
  • Submersible pressure sensor type ABS MD 126
    Submersible pressure sensor type ABS MD 126
    The MD 126 is a high-accuracy submersible hydrostatic level sensor. Encapsulated in stainless steel and resistant to sewage water, it is designed to measure levels in liquids such as storm water and wastewater in sump pumps.
  • Submersible Pressure Sensor Type ABS MD 127
    Submersible pressure sensor type ABS MD 127
    MD 127 is a sewage water resistant, stainless steel encapsulated, submersible, hydrostatic level sensor of very high accuracy and over pressure capability. It is designed for level measurement in liquids like stormwater and wastewater in pump sumps. When connecting the 2-wire loop powered sensor in series with a DC power supply, the MD 127 gives a 4 to 20 mA output signal which is proportional to the level of the liquid.
  • Submersible sewage pump type ABS AFP
    Submersible sewage pump type ABS AFP
    For reliable and economical pumping of heavily polluted sewage in commercial, industrial and municipal applications.
  • Submersible sewage pumps type ABS XFP with a Premium Efficiency motor and the unique Contrablock Plus impellers
    Submersible sewage pump type ABS XFP
    The submersible sewage pumps type ABS XFP are the best choice for ensuring efficient and reliable pumping in any wastewater pumping station. The submersible pumps are equipped with Premium Efficiency IE3 motors as standard and with the Contrablock Plus impellers.
  • The temperature and leakage relay type ABS CA 462 detects temperature and leakage in pumps and mixers
    Temperature and leakage relay type ABS CA 462
    CA 462 is designed to spy and detect temperature and leakage in pumps and mixers. The amplifier is housed in a norm enclosure fitted for DIN-rail mounting. The unit is available in two executions, 24 VDC or 110-230 VAC supply.
Documents

You may also me interested in
ABSEL water and wastewater pump selection tool
ABSEL water and wastewater pump selection tool
Sulzer employee at wastewater facility
Case studies
Contact us