Outlet pumping stations

Efficient handling of treated discharge water

Outlet pumping stations are required when the level of the treatment plant is lower than that of the receiving water. This is especially true when discharging into a river, which can rise during heavy rain or flood periods, or into the sea, where the level varies with the tide.

Outlet pumping stations may also be needed to compensate for increasing frictional losses in the outgoing pipe at high flows, for example in long sea outfall pipes.

Wastewater treatment process - outlet pumping station

Products

  • Dry installed sewage pump type ABS FR
    The FR dry-installed clogless pump enables economical pumping of heavily-polluted sewage and wastewater in municipal and industrial applications. It is ideal for pumping clear water, polluted water, and heavily-polluted sewage in commercial, industrial, and municipal applications.

  • Graphical operator interface type ABS CA 511
    The CA 511 is an operator panel for advanced monitoring of pumping stations. It can only be used in combination with the PC 441 monitoring/controller unit. The CAN-bus manages communications and supplies power. The TFT 480x272 pixel display includes 28 keys to simplify operations and ensure user-friendly operation.

  • Moisture monitoring module type ABS CA 441
    The CA 441 performs leakage monitoring on submersible pumps. With four signal inputs, it monitors up to four individual pumps or one pump with separate alarms. The unit can be mounted either in the cabinet or up to 250 meters away from the pump (when using the same earth potential). CA 441 can only be used in combination with the PC 441 monitoring/controller unit.

  • Motor and supply power monitoring module type ABS CA 443
    The CA 443 is an electrical property measuring device used either for a complete station or for a single pump. It can be connected to the PC 441 via a galvanic-isolated CAN-bus interface and can only be used in combination with the PC 441 monitoring/controller unit.

  • Output expansion module type ABS CA 781
    With output expansion module CA 781 you can control an extended number of pumps with your existing PC 441 system.

  • Pump controller type ABS PC 441
    The PC 441 is a monitor and controller for one to four pumps, designed mainly for use in municipal wastewater pumping stations. The PC 441 has many advanced features to minimize operating costs and increase the availability of the pumping station throughout its life cycle.

  • RS 485 communication module type ABS CA 622
    Communication module type ABS CA 622 allows you to send and receive information to your peripheral products via your existing pump controller PC 441 using a RS 485 Modbus interface.

  • Submersible mixed flow column Pump type ABS AFLX
    Save space and reduce installation costs with the AFLX range of submersible axial-flow pumps, designed for direct installation in discharge pipes.

  • Submersible propeller pump type ABS VUPX
    The VUPX pumps are ideal for applications where large volumes of storm or process water have to be pumped to heads up to a maximum of 10 meters.

  • Submersible sewage pump type ABS XFP 1.3-30 kW
    The submersible sewage pump type ABS XFP models PE1 to PE3 are designed for use in standard and network pumping stations.

  • Submersible sewage pump type ABS XFP 30-750 kW
    The submersible sewage pump type ABS XFP models PE4 to PE7 are designed for use in terminal and engineered pumping stations.

  • Temperature monitoring module type ABS CA 442
    The CA 442 is a temperature monitoring unit with four signal inputs. It can monitor one to four pumps with combined alarms (one alarm per pump) or up to four separate alarms using one unit per pump. The CA 442 can be connected to the PC 441 via a CAN-bus interface and can only be used in combination with the PC 441 monitoring/controller unit.

You may also be interested in

Events