Terminal pumping station

Reliable pumping of large sewage flows

Terminal pumping stations receive municipal wastewater from network pumping stations. Installed in dry or wet wells, the pumps forward the medium to a treatment plant for final purification. Due to the lack of screens at most pumping stations, difficult materials such as fibrous sanitary and packaging items are a constant threat to uptime.

Wastewater collection process network - terminal pumping stations
More information

The larger size, high sewage flows and long operating hours of terminal pumping stations make reliability the highest priority. Strong links between equipment selection, maintenance and operating strategy are thus required to keep them problem-free.

Sulzer’s application knowledge extends from pumping station design to ongoing optimization. By combining large solids passage with excellent rag handling, Sulzer pumps ensure blockage-free sewage pumping with the lowest lifecycle cost. Sulzer’s easy-to-use pump controllers and monitoring equipment further safeguard and improve station operation.

Products

Products

  • Dry installed sewage pump type ABS AFC
    The AFC dry-installed sewage pump is designed for pumping wastewater and sewage from buildings and sites in private, commercial, industrial, and municipal areas. With an air-cooled IEC motor from 3 to 22 kW, the pump can be installed either horizontally or vertically.

  • Dry installed sewage pump type ABS FR
    The FR dry-installed clogless pump enables economical pumping of heavily-polluted sewage and wastewater in municipal and industrial applications. It is ideal for pumping clear water, polluted water, and heavily-polluted sewage in commercial, industrial, and municipal applications.

  • Graphical operator interface type ABS CA 511
    The CA 511 is an operator panel for advanced monitoring of pumping stations. It can only be used in combination with the PC 441 monitoring/controller unit. The CAN-bus manages communications and supplies power. The TFT 480x272 pixel display includes 28 keys to simplify operations and ensure user-friendly operation.

  • Moisture monitoring module type ABS CA 441
    The CA 441 performs leakage monitoring on submersible pumps. With four signal inputs, it monitors up to four individual pumps or one pump with separate alarms. The unit can be mounted either in the cabinet or up to 250 meters away from the pump (when using the same earth potential). CA 441 can only be used in combination with the PC 441 monitoring/controller unit.

  • Motor and supply power monitoring module type ABS CA 443
    The CA 443 is an electrical property measuring device used either for a complete station or for a single pump. It can be connected to the PC 441 via a galvanic-isolated CAN-bus interface and can only be used in combination with the PC 441 monitoring/controller unit.

  • Output expansion module type ABS CA 781
    With output expansion module CA 781 you can control an extended number of pumps with your existing PC 441 system.

  • Pump controller type ABS PC 441
    The PC 441 is a monitor and controller for one to four pumps, designed mainly for use in municipal wastewater pumping stations. The PC 441 has many advanced features to minimize operating costs and increase the availability of the pumping station throughout its life cycle.

  • RS 485 communication module type ABS CA 622
    Communication module type ABS CA 622 allows you to send and receive information to your peripheral products via your existing pump controller PC 441 using a RS 485 Modbus interface.

  • Submersible sewage pump type ABS AFP
    For reliable and economical pumping of heavily polluted sewage in commercial, industrial and municipal applications.

  • Submersible sewage pump type ABS XFP 1.3-30 kW
    The submersible sewage pump type ABS XFP models PE1 to PE3 are designed for use in standard and network pumping stations.

  • Submersible sewage pump type ABS XFP 30-750 kW
    The submersible sewage pump type ABS XFP models PE4 to PE7 are designed for use in terminal and engineered pumping stations.

  • Temperature monitoring module type ABS CA 442
    The CA 442 is a temperature monitoring unit with four signal inputs. It can monitor one to four pumps with combined alarms (one alarm per pump) or up to four separate alarms using one unit per pump. The CA 442 can be connected to the PC 441 via a CAN-bus interface and can only be used in combination with the PC 441 monitoring/controller unit.

You may also me interested in

Events