Condensate extraction pumps (CEP) extract the condensate water from the condenser and pump it through the condensate polishing system and the LP heaters to the de-aerator feed water tank. In medium to large size gas-fired combined-cycle power plants, the CEP are vertical canned type to ensure enough Net Positive Suction Head Available (NPSHA). In small power plants, the CEP could also be horizontal end-suction type.

Condensate extraction pumps (CEP) extract the condensate water from the condenser and pump it through the condensate polishing system and the LP heaters to the de-aerator feed water tank. In medium to large size gas-fired combined-cycle power plants, the CEP are vertical canned type to ensure enough Net Positive Suction Head Available (NPSHA). In small power plants, the CEP could also be horizontal end-suction type.

Condensate extraction pumps (CEP) extract the condensate water from the condenser and pump it through the condensate polishing system and the LP heaters to the de-aerator feed water tank. The CEP are vertical canned type to ensure Net Positive Suction Head Available (NPSHA). In small plants, they can also be horizontal end suction type.

Condensate extraction pumps (CEP) extract the condensate water from the condenser and pump it through the condensate polishing system and the LP heaters to the de-aerator feed water tank. In medium to large size coal- and oil-fired power plants, the CEP are vertical canned type to ensure enough Net Positive Suction Head Available (NPSHA). In small coal and oil captive Power Plants, the CEP could also be horizontal end-suction type.

The condensate re-injection pump re-injects the cold condensate into the geothermal field to renew the resources.

Heat transfer fluid pump (HTF) pumps circulate thermal oil through the parabolic troughs to heat it up and pump it to the solar steam generator. The main characteristics of the HTF pumps are their high temperature and their double sealing system. Depending on the plant size, HTF pumps can be either double or end suction type.

Multi Effect Distillation (MED) process is based on iterative evaporation-condensation process in several stages under vacuum conditions, using residual steam from adjacent power plant as heating media for evaporation.

Sulzer’s extensive product portfolio to maximize the performance and reliability of your solid organic fuel biomass power plant, solid industrial or municipal waste fuel biomass power plant, and liquid or gaseous organic fuel biomass power plant processes.

Before reaching the RO Island, where specifically the desalination process will take place, raw water needs to be treated to ensure the required quality of the raw water to avoid fouling the RO membranes.

After post treatment, product water is pumped to the storage tanks or into the water distribution networks.

This is the heart of the SWRO desalination process, where the desalination effect takes place. The treated sea water is fed by means of the high pressure pumps into the RO membranes, obtaining permeate or product water and high pressure brine rejection, whose high pressure energy is recovered by selected Energy Recovery Device.

The steam generator Circulation Pumps (CP) circulate feed water from the hot water drum back to the solar steam generator to attemperate the steam temperature. The main characteristic of the CP is the high suction pressure. CP are high pressure end suction type.

Rental equipment for textile and bio-based process development initiatives either at customer facilities or Sulzer’s development center.

Raw water to be desalted, either sea water or brackish water will be taken from natural resource and pumped to pre-treatment stage. For sea water abstraction, different intake arrangements can be considered, which will define the pump type to be installed.