Domestic waste disposal from toilets | Sulzer

Pump

Submersible grinder pump type ABS Piranha
Piranha sewage pumps with shredding action provide reliable and economical discharge of effluent under pressure in private municipal and communal schemes.
Submersible wastewater pump type ABS AS
The AS range features robust, reliable submersible pumps from 1 to 3 kW for pumping clear water, wastewater, and sewage from buildings and sites in both domestic and commercial areas.

Lifting station

Lifting station type ABS Piranhamat 100 and 120
The Piranhamat 100 and 120 models are compact fecal pumping units for direct connection of one toilet in accordance with EN 12050-3.
Lifting station type ABS Piranhamat 701-1002
The Piranhamat 701-1002 is a flood-proof double lifting station for automatic sewage pumping from areas below the backwash level in accordance with EN 12050-1.
Lifting station type ABS Sanimat 1000
The Sanimat 1000 is a flood-proof single lifting station for the removal of wastewater and sewage from areas below the sewer level in accordance with EN 12050-1.
Lifting station type ABS Sanimat 1002
The Sanimat 1002 is a flood-proof double lifting station for automatic sewage pumping from areas below the backwash level in accordance with EN 12050-1.
Lifting station type ABS Sanimat 2002
The Sanimat 2002 is a flood-proof double lifting station ideal for effective sewage removal from apartments, large buildings and for both new and renovated structures.
Lifting station type ABS Sanimat 4002
The Sanimat 4002 is a flood-proof double lifting station for automatic sewage pumping from areas below the backwash level in accordance with EN 12050-1.
Lifting station type ABS Synconta 700 and 700L
The Synconta is a prefabricated polyethelyne sump designed as a single pumping station for the effective dewatering of buildings and areas below the sewer level.
Lifting station type ABS Synconta 801
The Synconta 801 is a single pump station, with a fixed pedestal and guiderail for simple pump installation and maintenance. It is ideal for automatic pumping of wastewater and sewage from locations where gravity discharge into the sewer is not possible.
Lifting station type ABS Synconta 901B and 902B
The Synconta 901B and 902B is a single or double pumping station, ideal for automatic pumping of wastewater and sewage from locations and areas below the backwash level.

Lifting station accessory

Check valves type ABS
Check valves type ABS are non-return valves made from cast iron or plastic for horizontal or vertical discharge lines in accordance with EN 12050-4.
Plug-in alarm type ABS
Plug-in acoustic alarm for connection to a 230 V Euro socket.

Control panel

Control panel type ABS CP 114
The CP 114 is a compact control panel for single pumping stations. It is suitable for use in applications such as tanks, small pits, or standard commercial applications with a single-phase 1/230/N/PE power supply.
Control panel type ABS CP 116 and CP 216
The CP 116 and CP 216 compact control panels for one or two pumps directly connect to pumps up to 5.5 KW (12A). The optional GSM/GPRS modem allows communication with AquaWeb or Supervisory Control and Data Acquisition (SCADA) systems using the Comli or Modbus protocols. Ex-versions are also available.
Control panels type ABS CP 112 and CP 212
The CP 112 and CP 212 are compact control panels for one or two pumps. They directly connect to pumps up to 5.5 kW (12A), and feature three-phase and single-phase versions. Ex-versions are also available.

Measuring device

Conductive level switch type ABS MD 131
The MD 131 is a conductive level switch primarily used as an overflow switch in sewage pumping pits. The MD 131 can also be used in other applications where the conductivity of the medium is above 20 μS/cm.
Float switch type ABS KS
The KS float switch, used in liquids for control or signal activation, operates in response to the liquid level. It is also suitable for use in sewage and for automatic level control. The KS float switch is impact- and shock-resistant, mercury-free, and environmentally friendly.
Pressure sensor type ABS MD 124
The MD 124 is a 4-20 mA loop-powered pressure sensor. It has a robust construction and is easily mounted on a standard 35 mm DIN rail. MD 124 is ideal for measuring liquid levels using the ”bubble tube” principle.
Submersible pressure sensor type ABS MD 126
The MD 126 is a high-accuracy submersible hydrostatic level sensor. Encapsulated in stainless steel and resistant to sewage water, it is designed to measure levels in liquids such as storm water and wastewater in sump pumps.
Submersible pressure sensor type ABS MD 127
MD 127 is a sewage water resistant, stainless steel encapsulated, submersible, hydrostatic level sensor of very high accuracy and over pressure capability. It is designed for level measurement in liquids like stormwater and wastewater in pump sumps. When connecting the 2-wire loop powered sensor in series with a DC power supply, the MD 127 gives a 4 to 20 mA output signal which is proportional to the level of the liquid.

Control accessory

Leakage control type ABS CA 461
CA 461 is designed to spy and detect leakage in pumps and mixers. The amplifier is housed in a norm enclosure fitted for DIN-rail mounting. The unit is available in two executions, 24 VDC or 110-230 VAC supply.
Temperature and leakage relay type ABS CA 462
CA 462 is designed to spy and detect temperature and leakage in pumps and mixers. The amplifier is housed in a norm enclosure fitted for DIN-rail mounting. The unit is available in two executions, 24 VDC or 110-230 VAC supply.

Pump controller

Equipment controller EC 531
The EC 531 is an all-in-one solution for control and monitoring of pumping stations with one or two pumps. EC 531 is equipped with smart VFD control including PID and Best Efficiency Point (BEP).
Pump controller type ABS PC 111
The PC 111 is a single-pump controller designed mainly for use in either gravitation or pressurized municipal wastewater pumping stations. Its many simple-to-use features improve pumping station functionality and reliability throughout its life-cycle.
Pump controller type ABS PC 211
The PC 211 is an easy-to-use dual-pump controller designed mainly for use in either gravitation or pressurized municipal wastewater pumping stations. Its numerous features improve pumping station functionality and reliability throughout its life-cycle.

You may also be interested in

ABSEL water and wastewater pump selection tool

Sulzer employee at wastewater facility