Main benefits
  • Easy to install as it requires few accessories
  • Hydraulics with Contrablock system or vortex impellers for blockage free operation
  • Low noise operation
  • Easy to lift by using the handle (weight-balance position)
  • Reduced energy consumption and low maintenance cost
  • Integrated float switch as an option (single-phase pumps up to 0.5 cv / 0.37 kW)
Main applications
  • Sewage and wastewater containing fecal matter
  • Removal of raw water and wastewater with viscous matter
  • Drainage of garages and flooded cellars
  • Pumping of liquid manure and slurry as fertilizers in agriculture
Main design features
  • Single-phase pump fitted with thermal protection, permanent capacitor or electronic switch with start-up capacitor
  • Protection type IP 68
  • Free solids passage: 20 to 50 mm
  • Ball bearings lubricated by insulating nontoxic oil
  • Housing in casting iron (EN-GJL-250: GG25) and stainless steel shaft (AISI 420)
  • Shaft sealing by carbon/ceramic mechanical seal
  • Power cord inlet sealed with rubber and epoxy resin
  • Standard 5 meter cable
Key characteristics
Capacities Up to 60 m³/h / 264 US gpm
Heads 24 m / 79 ft
Temperatures 40°C / max. 60°C for five minutes
Discharge sizes 2”, 3” BSP threaded connections
Maximum speed of rotation 3,450 rpm
Rated power 0.37 – 3.0 kW / 0.5 – 4.0 cv (only 60Hz motors available)
Contact us