Condensate extraction pump for biomass firing

Condensate extraction pumps with powerful capabilities

Condensate extraction pumps (CEP) extract the condensate water from the condenser and pump it through the condensate polishing system and the LP heaters to the de-aerator feed water tank. In medium to large size gas-fired combined-cycle power plants, the CEP are vertical canned type to allow artifical creation of enough Net Positive Suction Head Available (NPSHA). In small power plants, the CEP could also be horizontal end-suction type.

Condensate Extraction Pumps for biomass firing applications
Sulzer provides the following vertical canned and horizontal end suction type pumps as condensate extraction pumps:
SJD (CEP) ZE/ZF
Capacities
Up to 4,900 m3/h /
21,560 USgpm
Up to 2,600 m3/h /
11,440 USgpm
Heads Up to 400 m / 1,300 ft Up to 300 m / 1,000 ft
Pressures
Up to 94 bar / 1,360 psi Up to 100 bar / 1,450 psi
Temperatures Up to 100°C / 212°F Up to 100°C / 212°F

Products

  • SJD (CEP) vertical multistage can pump for condensate extraction
    SJD (CEP) pumps are specified wherever limited NPSH is available, either due to system constraints or liquids operating near to their vapor pressure. NPSH requirements of the pump are met by simply adjusting the length of the pump and can, with the advantage of minimized floor space usage.

  • ZE/ZF end suction pump range
    The ZE/ZF are ideal pumps for arduous industrial applications handling clean, cold or hot liquids, including hydrocarbons and light chemicals.