Clean water pump SMD for potable and treated water

Clean water pump with drinking water certificates

The SMD water pumps are available as standard and configured pumps to meet the demands of different water applications. With a best-in-class hydraulic design, the SMD pumps can take on challenges in raw, clean, sea and brackish water applications. The clean water pumps have ACS and NSF 61 drinking water certifications.

SMD potable water treatment pump with drinking water certificates - standard version
Main benefits
  • A wide range of configurations including standard pumps to meet any specific application need
  • Optimum hydraulic fit with high efficiency maintained over a wider flow range
  • Exceptionally low Net Positive Suction Head Required (NPSHR) value not only at the best efficiency point but also on overload
  • Maintenance-friendly features; excellent interchangeability of parts
  • Horizontal and vertical constructions to allow flexible pump station designs
Main applications
  • Water abstraction
  • Water transport
  • Desalination
  • Water treatment
  • Water supply and distribution
  • Irrigation, drainage and flood control
  • District cooling / heating
No datasource defined
Main design features
  • Double volute for all sizes with innovative cutwater for minimum radial load pulses
  • Multiple hydraulics per volute optimized by Computational Fluid Dynamics (CFD)
  • 360° bearing bracket with grease or oil lubricated bearings for 100 000 bearings life time
  • Finned bearing bracket equipped with maintenance-free bearing isolators; fan cooling option for optimum bearing performance
  • Dry shaft design

Optional features

Bearings

  • Cooling fan in thrust bearing for heavy duty applications such as high speed, high ambient temperature, provides effective cooling without need of cooling water
  • Connection for temperature and vibration monitoring instruments

Impeller wear ring

  • Shrink fit and axially secured
  • Offers additional impeller protection
  • Reduced maintenance cost in heavy duty applications
Seal plan options

  • Plan 11 as standard, with seal plans 31 and 32, with cyclon separator or with external flushing source
Key characteristics
Capacity 200 to 25'000 m3/h / 1'100 to 110'000 USgpm
Head Up to 260 m / 850 ft.
Pressure Up to 34 bar / 490 psi
Temperatures Up to 140ºC / 280ºF
Discharge sizes 150 to 1'000 mm / 6 to 40 inches
Standard and Configured SMD

To meet the demands of the individual applications, the SMD benefits from a best-in-class hydraulic design that is combined with two specific mechanical envelopes:

  • Standard SMD, focused on municipal water treatment, supply and distribution where typically a higher level of standardization is required, allowing the most cost effective solutions and shortest lead times.
  • Configured SMD combines standardization and modularization to offer a number of configurable options to meet the most common requirements of the water abstraction, transport and desalination industries.
SMD axially split casing double suction pump for clean water, water treatment, desalination - standard and configured versions
SMD axially split casing double suction pump - standard and configured versions
Performance range
Performance range 50 Hz of SMD axially split casing double suction potable clean water pump for water treatment and desalination
Performance Range 50Hz
Performance range 60Hz of SMD axially split casing double suction pump potable clean water pump for water treatment and desalination
Performange Range 60Hz
SMD in vertical arrangement

Vertical arrangement

  • With grease lubricated thrust bearing at the drive end and product lubricated proven design bearing at the non-drive end
  • Interchangeable casing with the horizontal arrangement
SMD clean water pump in vertical arrangement
SMD clean water pump in vertical arrangement
Applications
  • Cooling water pump (CWP) for biomass waste
    Cooling water pumps for biomass firing applications are typically horizontal axially split or end suction type. Vertical turbine type pumps are also available when required.

  • Cooling water pump (CWP) for gas-fired
    Cooling water pumps (CWP) provide the fresh water to cool the exhaust steam in the condenser and pump it back to the wet cooling tower or the outlet of open cooling system. The major characteristic of the CWP is their high flow. In medium to large size gas-fired combined-cycle power plants, the CWP are vertical column type. In small power plants, the CWP could also be horizontal axially split type.

  • Cooling water pump (CWP) for geothermal plants
    Sulzer offers a variety of cooling water pumps, all made to provide your processes with the optimum temperatures for your processes. Installed in a water cooled condenser, the pumps will be active for your specific process.

  • Cooling water pump for coal- and oil-fired
    Cooling water pumps (CWP) provide fresh water to cool the exhaust steam in the condenser and pump it back to the wet cooling tower or the outlet of open cooling system. The major characteristic of the CWP is their high flow. In medium to large size coal- and oil-fired power plants, the CWP are vertical column type. In small coal and oil captive power plants, the CWP could also be horizontal axially split type.

  • Cooling water pump for heliostat central tower with direct steam generation
    Cooling water pumps (CWP) provide fresh water to cool the exhaust steam in the condenser and pump it back to the wet cooling tower or the outlet of open cooling system. The major characteristic of the CWP is their high flow. CWP are vertical column type. In small plants, they can be horizontal axially split type.

  • Irrigation
    We provide pumps for the water supply for gravity and pressurized irrigation systems. For these applications, we offer vertical and horizontal pumps that are especially constructed to highly challenging pumping and energy efficiency requirements.

  • Multi Effect Distillation MED
    Multi Effect Distillation (MED) process is based on iterative evaporation-condensation process in several stages under vacuum conditions, using residual steam from adjacent power plant as heating media for evaporation.

  • Municipal clean water supply and distribution
    Getting drinking water to all parts of a distribution network involves many challenges along the way. From the water treatment plant through pumping stations and beyond, Sulzer pumps lift and move the drinking water to bring it to its destination at sufficient flow and pressure.

  • Municipal clean water treatment
    When planning new water treatment plants or upgrading existing ones, operating costs are as important as investment costs. Sulzer’s innovative pumps, mixers and compressors combine reliable treatment performance with superior energy efficiency.

  • Pre-treatment
    Before reaching the RO Island, where specifically the desalination process will take place, raw water needs to be treated to ensure the required quality of the raw water to avoid fouling the RO membranes.

  • Product water transfer
    After post treatment, product water is pumped to the storage tanks or into the water distribution networks.

  • RO-Island HPP 2nd pass
    This is the heart of the SWRO desalination process, where the desalination effect takes place. The treated sea water is fed by means of the high pressure pumps into the RO membranes, obtaining permeate or product water and high pressure brine rejection, whose high pressure energy is recovered by selected Energy Recovery Device.

  • Water intake
    Raw water to be desalted, either sea water or brackish water will be taken from natural resource and pumped to pre-treatment stage. For sea water abstraction, different intake arrangements can be considered, which will define the pump type to be installed.

  • Water transportation
    Water transport pumps are pumping large volumes of water over mostly long distances and high geodetic heights to geographical areas or industries where it is required for different purposes. We offer various configurations according to your needs.
Water certificates

NSF / ANSI 61 drinking water certification

The SMD pumps are certified with the NSF /ANSI 61 certification. In the certification process, the pump has gone through a variety of testing to ensure safe pumping of drinking water.

ACS certification (FR)

The SMD pumps are certified by ACS. The certification ensures that the pump is approved for pumping potable water.

How can we help you?

Talk or write to our experts to find your best solution.

An efficient solution for pumping raw, clean, sea and brackish water

Events