Mixers

Pick and mix: measured solutions to all your mixing needs

Mixers of the J- and Q-systems for metering and mixing construction 2-component materials are available in various designs and lengths to meet the requirements of specific applications. Minimal pressure loss and precise metering at high dispensing rates are just a few benefits.

Mixers of the J- and Q-systems

Mixers for anchoring

We offer a special range of disposable static mixers for use in chemical anchoring where the adhesive must be dispensed into a hole or inaccessible places. These mixers are designed with a long nose. On some mixers, an extension tube can be added to make the outlet even longer.

Sulzer QUADRO™ and helical mixers

Sulzer QUADRO™ and helical mixers for chemical anchoring applications


QUADRO™ mixers with bell inlet

A disposable mixer especially designed for use with 75 mL to 1500 mL cartridges; it can also be used for metering, mixing, or dispensing applications. Depending on the application in question, the stepped outlet can be adjusted by cutting.

If you are using the mixer on two-component machines and pressures above 25 bar (360psi), a Sulzer QUADRO™ shroud must be used.

To dispense small quantities, the Sulzer needle adapter can be used. Another option is the QUADRO™ 5.3/24PP with luer outlet. A range of disposable dispensing needles can be fitted onto its luer taper outlet.

QUADRO™ mixers with bell inlet

QUADRO™ mixers with stepped outlet to be adjusted to specific requirements by cutting; QUADRO™ mixer with integrated screw connection

Internal dimension

5.3

7.5 8.7 8.7 10.7

Number of elements

24 24 24 24 24
Outlet type

luer/step

step

step

step

step


QUADRO™ mixer with screw connection

The QUADRO™ mixer with integrated screw connection is a disposable mixer specifically designed for use with 75 mL to 1500 mL cartridges.

The mixer has a single lead 7/8" x 9 thread and can be screwed directly onto most cartridges without the need for a separate retaining nut.

The straight outlet allows high dosing rates. By adding a mixer extension onto the outlet, it is possible to apply resin to inaccessible places.

The outlet diameter of the mixers with stepped outlets can be adjusted by cutting.

QUADRO™ mixer with screw connection

QUADRO™ mixers with screw connection with a straight outlet allow high dosing rates; QUADRO™ mixer with bell inlet: its stepped outlet can be easily adjusted to the specific application

Internal dimension 8.7 8.7 8.7 8.7 10.7 10.7 10.7

Number of elements

20 20 16 19 24 24 24
Outlet type

straight

stepped

straight

stepped

straight

straight

straight


Brochures
Product information
How can we help you?

Talk or write to our experts to find your best solution.