Submersible wastewater pump type ABS Robusta (BR)

Efficient pumping solution for residential areas

Designed for pumping raw water, wastewater, and sewage from buildings and sites in both domestic and commercial areas. Free solids passage up to 50 mm. The pump and motor section form a pressure-tight encapsulated unit which is fully flood-proof.

Submersible wastewater pump type ABS Robusta (BR) for the Brazilian market
Available in Brazil only
Main benefits
  • Easy to install as it requires few accessories
  • Hydraulics with Contrablock system or vortex impellers for blockage free operation
  • Low noise operation
  • Easy to lift by using the handle (weight-balance position)
  • Reduced energy consumption and low maintenance cost
  • Integrated float switch as an option (single-phase pumps up to 0.5 cv / 0.37 kW)
Main applications
  • Sewage and wastewater containing fecal matter
  • Removal of raw water and wastewater with viscous matter
  • Drainage of garages and flooded cellars
  • Pumping of liquid manure and slurry as fertilizers in agriculture
Main design features
  • Single-phase pump fitted with thermal protection, permanent capacitor or electronic switch with start-up capacitor
  • Protection type IP 68
  • Free solids passage: 20 to 50 mm
  • Ball bearings lubricated by insulating nontoxic oil
  • Housing in casting iron (EN-GJL-250: GG25) and stainless steel shaft (AISI 420)
  • Shaft sealing by carbon/ceramic mechanical seal
  • Power cord inlet sealed with rubber and epoxy resin
  • Standard 5 meter cable
Key characteristics
Capacities Up to 60 m³/h / 264 US gpm
Heads 24 m / 79 ft
Temperatures 40°C / max. 60°C for five minutes
Discharge sizes 2”, 3” BSP threaded connections
Maximum speed of rotation 3,450 rpm
Rated power 0.37 – 3.0 kW / 0.5 – 4.0 cv (only 60Hz motors available)
Applications
How can we help you?

Talk or write to our experts to find your best solution.