- High efficiency
- Propeller design with orientable blades
- Low maintenance activity
AGV for high flow and low head applications
Heavy duty, vertical, axial flow pump at customized length
The AGV pump is mainly used for water applications such as irrigation, water supply, drainage, and water level regulation. The benefits of this vertical pumps are its high flow capabilities and a smart propeller design. This pump, in general, requires low maintenance activity.
- Irrigation
- Water supply
- Water drainage
- Water level regulation
- Sump drainage
- Flood protection
Main design features
- Propeller type - axial flow pump
- Heavy duty construction
- Design offering high efficiency for high flow requirement
- Larger diameter upon request
- Simple design offers ease of installation and minimum maintenance
- Construction with the discharge head under or above the base plate available upon request
- Solid cast steel construction of the pump casing
- Optimized suction bell (Low NPSH)
- Flexible sealing system:
- Shaft sealing by packing rings are standard.
- Throttle bushing sealing system allowing reduced maintenance
- Optional mechanical seal available upon request
- Column bearings lubricated by the pumped liquid or with an automatic grease lubrication system for slightly dirty product
- Pump length according customer specifications
- Suction strainer is optional
Key characteristics
| Capacities |
Up to 30,000 m³/h (132,100 US gpm) |
| Heads | Up to 7 m / 26 ft |
| Pressures | Up to 6 bar / 100 psi |
| Temperatures | From -40 °C to +180 °C / -202 °F to +356 °F |
| Discharge sizes | From 300 to 1,400 mm |
| Higher flows on request |
