Condensate extraction pump for coal- and oil-fired

Condensate extraction pumps for multiple applications

Condensate extraction pumps (CEP) extract the condensate water from the condenser and pump it through the condensate polishing system and the LP heaters to the de-aerator feed water tank. In medium to large size coal- and oil-fired power plants, the CEP are vertical canned type to ensure enough Net Positive Suction Head Available (NPSHA). In small coal and oil captive Power Plants, the CEP could also be horizontal end-suction type.

Condensate Extraction Pump (CEP) for coal-fired
Sulzer provides the following vertical canned and horizontal end suction type pumps as condensate extraction pumps for coal- and oil-fired power plants:
SJD (CEP) ZE
Capacities
Up to 4,900 m3/h /
21,560 USgpm
Up to 2,600 m3/h /
11,440 USgpm
Heads Up to 400 m / 1,300 ft Up to 300 m / 1,000 ft
Pressures
Up to 94 bar / 1,360 psi Up to 60 bar / 870 psi
Temperatures Up to 100°C / 212°F Up to 425°C / 800°F

Products

  • SJD (CEP) vertical multistage can condensate extraction pump
    SJD (CEP) vertical can condensate extraction pumps, are specified wherever limited NPSH is available, either due to system constraints or liquids operating near to their vapor pressure, typically for condensate extraction and heater drain pump applications.

  • ZE/ZF end suction pump range
    The ZE/ZF are ideal pumps for arduous industrial applications handling clean, cold or hot liquids, including hydrocarbons and light chemicals.

You may also be interested in