- Pumps down to 3 mm when the detachable suction ring is fitted into the screen
- Easy installation with Schuko plug and 10 m cable
- Automatic operation with built-in float switch for reliable operation
- Backflow is prevented with built-in check valve
- Fits in small sumps from 300 x 300 mm
- Suitable for both manual and automatic operation with the unique hand/auto switch
Light drainage pump type ABS Robusta
For the smaller pumping challenges
The Robusta 200 and 300 models are plug-in, submersible pumps designed to remove wastewater containing solids up to 10 mm. The pump and motor form a pressure-tight encapsulated fully flood-proof unit .
- Domestic and commercial wastewater without toilet waste
- Drainage of pits and flooded cellars
Main design features
- Thermal sensors
- Three lip seals lubricated by a grease chamber
- Protection type IP 68
- Stainless steel rotor shaft supported in lubricated-for-life ball bearings
- Motor housing made of corrosion-resistant material, and the outer jacket and impeller of durable plastics
- 60 Hz version available with approval (UL, CSA)
Key characteristics
| Capacities | Up to 12 m3/h / 52 US gpm |
| Heads | 8.5 m / 28 ft |
| Temperatures | 40°C up to 60°C / 104°f up to 140°F |
| Discharge sizes | G 1¼” |
| Maximum speed of rotation | 2,900 rpm |
