SMD Axially Split Casing Double Suction Pump

The SMD pumps are designed for a wide range of raw, clean, sea and brackish water applications. To meet the demands of the individual applications, the SMD benefits from a best-in-class hydraulic design that is combined with two specific mechanical envelopes; Standard SMD and Configured SMD.

Information

Main benefits

  • A wide range of configurations including standard pumps to meet any specific application need
  • Optimum hydraulic fit with high efficiency maintained over a wider flow range
  • Exceptionally low Net Positive Suction Head Required (NPSHR) value not only at the best efficiency point but also on overload
  • Maintenance-friendly features; excellent interchangeability of parts
  • Horizontal and vertical constructions to allow flexible pump station designs

Main applications

  • Water abstraction
  • Water transport
  • Desalination
  • Water treatment
  • Water supply and distribution
  • Irrigation, drainage and flood control 
  • District cooling / heating

Main design features

  • Double volute for all sizes with innovative cutwater for minimum radial load pulses
  • Multiple hydraulics per volute optimized by Computational Fluid Dynamics (CFD)
  • 360° bearing bracket with grease or oil lubricated bearings for 100 000 bearings life time
  • Finned bearing bracket equipped with maintenance-free bearing isolators; fan cooling option for optimum bearing performance
  • Dry shaft design

Key characteristics

Capacity 200 to 25,000 m3/h / 1,100 to 110,000 USgpm
Head Up to 260 m / 850 ft
Pressure Up to 34 bar / 490 psi 

Temperatures

Up to 140ºC / 280ºF
Discharge sizes 150 to 1,000 mm / 6 to 40 inches

Performance Range

SMD 50 HzClick to zoom
 

SMD 60HzClick to zoom

 Performance Range 50Hz    Performange Range 60Hz
 

SMD Axially Split Casing, Double Suction Pump

Related Links

Switch to tab Documents

Applications