Submersible Wastewater Pump
Type ABS Scavenger EJ (BR)

Designed for pumping raw water, wastewater, and sewage from buildings and sites in both domestic and commercial areas. Free solids passage up to 65 mm. The pump and motor section form a pressure-tight encapsulated unit which is fully flood-proof.

Information

Available in Brazil only

Main benefits

  • Hydraulics with Contrablock system or vortex impellers for clog-free operations
  • Unique triple seal design for outstanding reliability
  • Suitable for portable as well as in stationary installations
  • Easy to lift by using the handle (weight-balance position)
  • Motor and shaft seal monitoring system as an option
  • Low noise operation
  • Reduced maintenance cost

Main applications

  • Sewage and wastewater containing fecal matter
  • Removal of raw water and wastewater with viscous and fibrous matter
  • Drainage of garages and flooded cellars
  • Light agricultural usage (pumping of liquid manure and slurry)

Main design features

  • Three-phase centrifugal pump
  • Protection type IP 68
  • Double carbon/ceramic mechanical seal
  • Thermal sensors in the motor switch the pump off in the event of overheating (option on BX and BVX models)
  • Double mechanical seal in the oil chamber
  • Ball bearings lubricated by insulating nontoxic oil
  • Water leakage electrode sensors in the oil chamber (as an option on BX and BVX models)
  • Free solids passage: 45 to 65 mm
  • Rugged cast iron construction (EN-GJL-250: GG25)
  • Stainless steel fasteners and motor shaft (AISI 420)
  • Power cord inlet sealed with rubber and epoxy resin
  • Standard 7 meter PVC cable

Key characteristics

Capacities

Up to 109 m³/h / 480 US gpm

Heads

30 m / 98 ft
Temperatures 40°C / max. 60°C for five minutes

Discharge sizes

3” ANSI 125 / DN 75 NBR 7675 horizontal flange
Maximum speed of rotation 3,450 rpm
Rated power 0.75 – 5.5 kW / 1.0 – 7.5 cv (only 60Hz motors available)

Switch to tab Documents