Submersible Wastewater Pump
Type ABS Robusta (BR)

Designed for pumping raw water, wastewater, and sewage from buildings and sites in both domestic and commercial areas. Free solids passage up to 50 mm. The pump and motor section form a pressure-tight encapsulated unit which is fully flood-proof.

Information

Available in Brazil only

Main benefits

  • Easy to install as it requires few accessories
  • Hydraulics with Contrablock system or vortex impellers for blockage free operation
  • Low noise operation
  • Easy to lift by using the handle (weight-balance position)
  • Reduced energy consumption and low maintenance cost
  • Integrated float switch as an option (single-phase pumps up to 0.5 cv / 0.37 kW)

Main applications

  • Sewage and wastewater containing fecal matter
  • Removal of raw water and wastewater with viscous matter
  • Drainage of garages and flooded cellars
  • Pumping of liquid manure and slurry as fertilizers in agriculture 

Main design features

  • Single-phase pump fitted with thermal protection, permanent capacitor or electronic switch with start-up capacitor
  • Protection type IP 68
  • Free solids passage: 20 to 50 mm
  • Ball bearings lubricated by insulating nontoxic oil
  • Housing in casting iron (EN-GJL-250: GG25) and stainless steel shaft (AISI 420)
  • Shaft sealing by carbon/ceramic mechanical seal
  • Power cord inlet sealed with rubber and epoxy resin
  • Standard 5 meter cable

Key characteristics

Capacities

Up to 60 m³/h / 264 US gpm

Heads

24 m / 79 ft

Temperatures

40°C / max. 60°C for five minutes

Discharge sizes 2”, 3” BSP threaded connections

Maximum speed of rotation

3,450 rpm

Rated power 0.37 – 3.0 kW / 0.5 – 4.0 cv (only 60Hz motors available)

Switch to tab Documents